Mini-size 2ch. ECG sensor module with isolation

PSL-iECG2(Mini-size 2ch ECG sensor module with isolation)

(Contact : physiola@hanmail.net , Buy : Amazon PhysioLab)

PSL-iECG2 is a small 2-channel ECG module that outputs ECG waveforms and heart beats.

DC 5V input power can be used the power of the Arduino board without any other power supply which is very convenient. Amplification is a 750 V/V. The notch filter can be adjusted to 50Hz or 60Hz by the notch filter selectable switch. The module outputs a high-quality ECG signal by applying the low noise and optimal filter design.

PSL-iECG2 guarantees electrical safety through isolation power and signal during measuring. For the high quality signal input the premium lead cable with shield is provided, and the cable adopts a stereo jack to connect simply.

Main Features

• Analog ECG 2-channel amplifier module(Ch.1 ECG, Ch.2 Beat) 
• DC 5V power input
• Isolation power and signal
• Amplification 750V/V
• Selectable 50Hz or 60Hz by the notch filter switch
• Size 56mm x 35mm
• Lead cable with shield and stereo jack

Block Diagram

Specifications

Item		Spec.
Output signal		ECG, Beat(2 channel)
Output signal range		0~3.3V(Center 1.65V)
Electric current consumption		below 50mA
Amplification		750V/V(below ±2%)
Filter set	Notch	Adjustable 50Hz or 60Hz
	HPF	0.3Hz
	LPF	35Hz
Isolation		Power & Signal
Insulation Withstand Voltage		1kV DC(5sec.)
Size		56mm x 35mm(PCB)
CMRR		60dB
Contents		-PSL-iECG2 module1EA -3 wire shielded lead cable (1,100mm, stereo jack) 1EA -Output Cable 1EA -Electrode 1Pack (6ea) -Manual 1EA

Application

PSL-iECG2 & PSL-DAQ

* PSL-DAQ is 2ch. DAQ Module. 

PSL-iECG2 & Arduino UNO

(Contact : physiola@hanmail.net , Buy : Amazon PhysioLab)